Basic Info.
Nature of Source Flow
Active Inverter
Certification
SAA, CE, ISO9001, TUV ETL
Circuit Topologies
Full-Bridge Type
Nature of Wave String
Sine Wave Inverter
Input MPPT Tracking Range(VDC)
22~55
Max Recommended PV Power(Wp)
285
Max DC Input Current(ADC)
12
Allowable Power Grid Voltage(VDC)
230 Configurable
Allowable Power Grid Frequency(Hz)
50 60 Configurable
Over/Under Voltage/Frequency Protection
Yes
Anti-Islanding Protection
Yes
Protection Degree
NEMA-6/IP67
Application
Solar Power System
Specification
CE TUV SAA ETL
Product Description
300Watts Home Application Micro Solar Inverter with AC Cable
Products description:
Thinnest micro inverter in world, 25mm in thickness
Designed for frame mount (AC module), as well as rack mount
High output power up to 250wac, support 300w solar panels
High efficiency with 95.5% CEC
Globally certified for c-ETL-us, SAA, TUV, VDE-AR-N 4105, VDE 0126, G83/2, IEC61727
Integrated grounding for easy installation
Nema-6 enclosure rating
Integrated monitoring and power line communication with BDG-256 gateway
25 years warranty
Certificates: TUV, CE, SAA, VDE, G-83 Etc. More than 22 countries Certificates.
Advantages:
MUCH SAFER
ACPV Systems are the safest choice for generating solar rooftop power as unlike traditional DC-based string/central inverters which have a high DC voltage of up to 600V running through their DC cables, AC systems are less likely to sustain Arc faults (a major cause of PV fires) due to the internal DC voltage being only that of a single PV module.
FASTER INSTALL
Micro Inverter based systems take up to to 50% less time to install when compared to string based DC systems. As micro inverters are integrated onto the Solar modules and arrive at a job site ready to install, no DC cabling in conduit is required, significantly reducing installation cost and complexity.
MORE DEPENDABLE
The micro inverter is highly reliable as it is designed to operate from -40C to +85C, achieves a peak efficiency of 94.1% and has a 25 year life expectancy to match solar panels. Micro inverters are more dependable through the elimination of the central inverter, which typically requires replacing at least once in a system's lifetime.
MORE PERFORMANCE
Micro inverters allow each solar panel to operate independently and control the power from each with 99.6% accuracy. This results in a significant increase in the performance of the entire system over a single inverter system (see images below). You can also monitor the performance of each AC module online.
24 hours monitoring system:
By connecting micro inverters with NEP communications gateway BDG-256, Customers, distributors and installers could monitor the energy generation at any time and at any place.
Packing:
One piece of BDM-300
Weight: 2.2kg
Volume: 0.43*0.2*0.06≈0.0052m³
One carton box (10 pics)
Weight: 25kg
Volume: 0.45*0.34*0.415≈0.0635m³
Company Profile:
Northern Electric and Power is the company founded in 2009. The core competency of NEP lies in its innovative research center. The technology founders of the company are well-known experts in the fields of power electronics, automatic control, signal processing, and communications. Some of the research engineers had the work experience in the well-known industrial institutes in the US, such as GE Research and Development Center in Schenectady, NY, Motorola Research Center in Chicago. NEP has three locations. They are in the US, Japan and China.
MODEL | BDM-300-240A | BDM-300-208A | BDM-300-EU BDM-300-AU |
INPUT(DC) | Max Recommended PV Power (Wp) | 300 |
Max DC Open Circuit Voltage (Vdc) | 60 |
Max DC Input Current (Adc) | 12 |
MPPT Tracking Accuracy | >99.5% |
MPPT Tracking Range (Vdc) | 22-55 |
Isc PV (absolute maximum) (Adc) | 14 |
Maximum Inverter Backfeed Current to the Array (Adc) | 0 |
OUTPUT(AC) | Rated AC Output Power (Wp) | 250 |
Nominal Power Grid Voltage (Vac) | 240 | 208 | 230 |
Allowable Power Grid Voltage (Vac) | 211-264* | 186-228* | configurable |
Allowable Power Grid Frequency (Hz) | 59.3-60.5* | configurable |
THD | <3% (at rated power) |
Power Factor (cos phi, fixed) | >0.99% |
Current (maximum continuous) (Aac) | 1.4 |
Current (inrush) (Peak and Duration) | 12A, 15us |
Nominal Frequency (Hz) | 60 | 50 |
Maximum Output Fault Current (Aac) | 2.2A peak |
Maximum Output Overcurrent Protection (Aac) | 6.3 |
Maximum Number of Units Per20A Branch | 17 | 16 | 17 |
SYSTEM EFFICIENCY | Peak Efficiency | 96.30% | 96.30% | 95.80% |
CEC Efficiency | 95.50% |
Night Time Tare Loss (Wp) | 0.08 | 0.06 | 0.08 |
PROTECTION FUNCTIONS | Over/Under Voltage Protection | Yes |
Over/Under Frequency Protection | Yes |
Anti-Islanding Protection | Yes |
Over Current Protection | Yes |
Reverse DC Polarity Protection | Yes |
Overload Protection | Yes |
Protection Degree | NEMA-6 / IP-67 |
Environment Temperature | -40C~+65C |
OTHER PARAMETERS | Environment Humidity | 100%, condensation |
Display | LED LIGHT |
Communications | Power Line |
Dimension (D-W-H mm) | 180*186*25 |
Weight (Kg) | 1.5 |
Environment Category | Indoor and outdoor |
Wet Location | Suitable |
Pollution Degree | PD 3 |
Maximum Altitude | 2000 M |
Overvoltage Category | II(PV), III (AC MAINS) |
Product Safety Compliance | UL 1741 CSA C22.2 No. 107.1 | IEC/EN 62109-1 IEC/EN 62109-2 |
Grid Code Compliance* (Refer to the label for the detailed grid code compliance) | IEEE 1547 | VDE-AR-N 4105* VDE V 0126-1-1/A1 G83/2 AS 4777.2 & AS 4777.3 |
| Note: For grid code VDE-AR-N 4105, maximum 3.68kVA PV plant is limited. The grid protection report and setting are readable from the gateway. For grid code G83/2, maximum 16A per phase is limited. The grid protection report and setting are readable from the gateway. Grid parameters are configurable through the BDG-256 gateway |
Address:
No. 1 Anhe Road, Export Processing Zone, Chengyang, Qingdao, Shandong, China
Business Type:
Manufacturer/Factory
Business Range:
Auto, Motorcycle Parts & Accessories, Electrical & Electronics, Industrial Equipment & Components, Manufacturing & Processing Machinery, Service, Tools & Hardware
Management System Certification:
ISO 9000
Company Introduction:
Our company was founded in the United States and has manufacturing and R&D facilities in China. The mission of our company is to develop cutting-edge clean energy technologies and provide state-of-the-art solar inverter products for our customers. The first round of investment to our company was USD20 million, with a planned total investment of USD50 million. Our company is headquartered in the city of Tsingtao, a major industrial center and trading port in the Northeastern China. Our company occupies an area of more than 18 acres in the Tsingtao Export Processing Zone, and has more than 650, 000 square feet building space. The campus is planned to be connected through a micro smart grid demo community and powered by electricity from solar, wind and micro turbines. Outside China, our company has operation offices in Chicago, the US and Vancouver, Canada.
The technology founders of our company are well-known experts in the fields of power electronics, automatic control, signal processing, and communications. Each founder has multiple the US and world patents in their specialty areas. They received pH. D. Degrees from top universities in North America, and each has more than 10 years′ Engineering and management experience in leading the US companies.
We have a complete product line of grid-tied solar inverters, including 250W~500W micro inverters, 1.5kW~5kW single phase solar inverters, and 10kW~500kW three-phase solar inverters. Field deployment results demonstrate high system efficiency and reliability of NEP solar inverters.
We are committed to developing clean, reliable, affordable and efficient (CARE) products for worldwide customers.